Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Placement of the fuse box of the Audi A3 MK4

Model: Audi A3 8Y, MK 4 - Years 2020-2026
Part: Fuse box

To check the status of the fuses in the electrical system of the Audi A3, we need to know the location of the two boxes that contain them. We find one of the boxes in the dashboard on the left side of the steering column, covered by a snap-closed door, near the headlight controls. The other is located in the engine compartment, on the driver's side, between the battery and the fender, closed by a black plastic cover inside which we find a convenient pair of tweezers to remove the fuses. To locate the fuse we are looking for, we consult the diagram inside the owner's manual.

Posted on 14 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Diagram and Positioning of Fuse Boxes in Audi A3
Diagram and Positioning of Fuse Boxes in Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) In this brief guide, we will look at the diagram and positioning of the fuse boxes in the Audi A3. First, open the front door of the vehicle and star…
What is the fuse layout of the Audi A3?
What is the fuse layout of the Audi A3?
Audi A3 (2020-2026 / 8Y, MK 4) In this video we can see where the fuse boxes of the Audi A3 are located and what are the respective schemes, useful in case we need to check the fus…
Diagram and fuse box on 2015 Audi A3
Diagram and fuse box on 2015 Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Thanks to this short video tutorial we can see where the two fuse boxes are located, and also view all the related fuse diagrams on a third generatio…

Other guides you may be interested in

    Frequently Asked Questions

    • A3 2003-2013 - Where is the immobilizer fuse located on Audi A3? Read answer
    • A3 2003-2013 - Where is the license plate light fuse on Audi A3 located? Read answer

How to Replace the Right Fog Light Bulb on a Ford Fiesta

Replacing the fog light bulb on the passenger side, which uses an H11 fitting (the bulb holder also integrates the connector for the power supply), can be done either by accessing from underneath the vehicle by removing some covers, or more simply by dismantling the headlight. Once the headlight is removed, it is easy to reach the fog light housing and release the bulb by rotating the entire bulb holder. Disconnect the connector, connect the new bulb, and insert it into the bulb holder, rotating it until it locks in place.

Watch the video!


by ScegliAuto

More videos