Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Headlight Bulbs on an Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

Want to replace the headlight bulbs on an Audi A4 but don't know how? Let's go through the steps together. Open the hood by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap of the headlight (located at the rear of the headlight) and remove it. At this point, you will find the bulbs with metal clips.

Pull the bulb holder out of the headlight and extract the damaged bulb using a screwdriver. Install the new bulb (make sure it is the correct type and size) and insert the bulb holder back into the headlight housing.

Finally, close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Remove the Front Headlight on Audi A4
Remove the Front Headlight on Audi A4
Audi A4 (2000-2004 / B6) Removing the front headlight on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headlight…
Replace Rear Headlight Bulbs on Audi A4
Replace Rear Headlight Bulbs on Audi A4
Audi A4 (2007-2016 / B8) Remove the rear headlight to access the damaged bulbs on the Audi A4. Open the trunk, remove the plastic cover from the trunk (side). Unscrew the ret…
How to Change the Headlight Bulbs on an Audi A4
How to Change the Headlight Bulbs on an Audi A4
Audi A4 (2004-2008 / B7) Let's see how to change the headlight bulbs on an Audi A4. Open the hood by pulling the lever located at the bottom left of the dashboard; secure it.…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos