Do it yourself
Frequently asked questions about cars and motorcycles

Installing the iPod, Aux, MP3 Adapter Accessory Kit

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

First, you need to have the appropriate keys to release the car radio (the key has a tapered end that gives it a triangular profile) and the iPod adapter wiring harness. Turn on the car radio and rotate the satellite navigation screen as if you were about to insert a CD. Insert the keys into the four corners of the car radio, ensuring the taper is facing inward: when the key is inserted, the retaining spring will release.

Once all four springs are released, pull out the car radio by pulling two keys placed diagonally, turn off the car radio, and disconnect the connected plugs (GPS antenna, FM antenna, and ISO connector). At this point, connect the iPod adapter wiring harness to the ISO connector, route the cable to position the Aux output inside the glove compartment, then reconnect all plugs to the car radio and insert it back into its designated slot, pressing until the retaining springs engage.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) Using the four special tools designed for this purpose, insert them into the slots above and below the car radio to release the retaining springs, th…
Audi A3 (2003-2013 / 8P, MK 2) Before proceeding, obtain the tuning kit for the vehicle in question. Open the bonnet and access the installed control unit. Remove the original conn…
Audi A3 (2003-2013 / 8P, MK 2) In this guide, we will see the instructions that will allow us to disassemble and replace the clutch kit of the Audi A3 2.0 TDI. First of all, we ope…

Other guides you may be interested in

    Frequently Asked Questions

    • A3 2012-2019 - Where is the usb port in the Audi A3? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos