Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part:

The tire pressure warning light that appears on the instrument panel of the Audi Q3 can be reset by inflating the tires: they must be brought back to the recommended pressure value indicated on the sticker attached to the driver's door pillar. Once the tires have been inflated, you can navigate to the menu that appears on the central screen of the dashboard: you can select "Vehicle settings", then "Servicing & checks" and then "Tyre pressure monitoring". In the screen that appears next, you can select "Store tyre pressure" to make the warning light disappear completely.

Posted on 29 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Audi Q3?
How do you reset the tire pressure warning light on the Audi Q3?
Audi Q3 (2018-2025 / F3) To reset the tire pressure warning light on the Audi Q3, you need to inflate the tires to the correct pressure value: this value is indicated on the …
How to reset the tire pressure sensor of the Audi Q3
How to reset the tire pressure sensor of the Audi Q3
Audi Q3 (2018-2025 / F3) In this article we will see how to reset the tire pressure warning light on the Audi Q3. To reset this warning light, first start the instrument pane…
How do you reset the tire pressure warning light on the Audi Q3?
How do you reset the tire pressure warning light on the Audi Q3?
Audi Q3 (2011-2018 / 8U) The tire pressure warning light that appears on the instrument panel of the Audi Q3 will first of all require all tires to be brought to the recommen…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos