Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Problem with the wheel rotation sensor of an Audi Q3 Sportback.

Model: Audi Q3 F3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

In this video we can see the problem with the wheel speed sensor of an Audi Q3 Sportback: on this car, yellow warning lights related to ABS, EDC, and TPMS would appear, which would then turn off after a few minutes. A diagnosis confirmed that the issue was with the front left wheel speed sensor: how does this sensor work? Through a toothed wheel, square waves are generated, which the sensor reads in order to identify the movement and speed of the wheel; if the sensor is damaged, it communicates incorrect data to the system.

It is not necessarily the sensor that needs to be replaced, the issue could be with the toothed wheel, causing the sensor to no longer be able to read the wheel movement; of course, the wiring should also be checked for any damage that may prevent proper communication.


Posted on 11 December 2024 by ScegliAuto


Related tutorials

How to Replace the Remote Battery for the Audi Q3 Sportback?
How to Replace the Remote Battery for the Audi Q3 Sportback?
Audi Q3 (2018-2025 / F3) Replacing the remote battery for the Audi Q3 Sportback, as shown in this tutorial, is a very simple and quick task. To do this, you will only need a …
How to Reset the Tire Light on the Audi Q3 Sportback?
How to Reset the Tire Light on the Audi Q3 Sportback?
Audi Q3 (2025-2026 / MK 3) In this tutorial, you will see how to reset the tire light on the Audi Q3 Sportback, a very simple and quick operation to perform only after completi…
Position and function of the collision sensor of the Audi Q3.
Position and function of the collision sensor of the Audi Q3.
Audi Q3 (2011-2018 / 8U) The airbag collision sensor (or crash sensor) detects the impact and its severity, thereby determining which airbags to activate. The front sensor is…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos