Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the storage compartment of an Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Checks and maintenance

To disassemble the storage compartment of an Audi A4, start by opening the compartment and identifying the internal fixing screws. Use a screwdriver to carefully unscrew these screws. Next, unclip and remove the side cover to access the remaining screws. Using the same screwdriver, also unscrew these screws carefully. Once all the screws have been removed, carefully grasp the storage compartment and pull it towards you to extract it from its position. During this operation, pay attention to any rear connectors that may be connected to the storage compartment. Disconnect the connectors carefully to avoid damaging the cables. Once the connectors are disconnected, the storage compartment will be completely removed and you can perform any necessary repairs or maintenance.

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2007-2016 / B8) In this video, we can see how to disassemble the glove compartment of an Audi A4 B8: we will need a Torx key size 8, plastic spatulas, and a ratchet …
Audi A4 (1994-2000 / B5) In this tutorial, we can see how to disassemble the glove compartment in the Audi A4, an extremely simple and quick operation. First of all, go to th…
Audi A4 (2000-2004 / B6) Today we will explain how to remove the door panel of an Audi A4 model b6. The steps to follow are simple and quick. The first step is to open the de…

    Frequently Asked Questions

    • A4 2007-2016 - How does the navigation system of my Audi A4 work? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos