Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance of the Audi A6 C7

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Onboard computer

In this article, we will see how to reset the maintenance indicator of our Audi A6 C7. The procedure takes less than 1 minute to complete and does not require any tools or software. To perform the reset, we first need to turn on the ignition without starting the engine, then press the CAR button located in the central tunnel. This will open the menu related to the car, where we select the system option. From the menu that appears, we select the service and oil change option, then scroll and select the service interval option. Next, we need to scroll to the reset option and select it, confirming that we want to reset it. Now the procedure will be complete, and we can restart the ignition to verify that the reset has been done correctly.

Posted on 17 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service in an Audi A6?
How to Reset the Service in an Audi A6?
Audi A6 (2011-2018 / C7, MK 4) In this tutorial, you will see how to reset the service in an Audi A6, an extremely simple and quick operation to perform only after completing all s…
How to reset the maintenance light on the Audi A6
How to reset the maintenance light on the Audi A6
Audi A6 (2011-2018 / C7, MK 4) These simple steps will show us how to reset the maintenance reminder (engine oil change) of the Audi A6. First of all, we get on board the car and s…
How to Maintain the Fuel Pump of an Audi A6
How to Maintain the Fuel Pump of an Audi A6
Audi A6 (1997-2004 / MK 2, C5) Let's see how to maintain the fuel pump of an Audi A6: disconnect the battery cables, then remove the rear seat cushions of the car. Use a socket wre…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos