Do it yourself
Frequently asked questions about cars and motorcycles

How to reprogram the remote control of an Audi?

Model: Audi Audi Various
Part: Key

Video tutorial

In this tutorial we can see how to reprogram the remote control of an Audi, an extremely simple and quick operation, to be carried out for example after replacing the battery. This procedure is valid only for remote controls previously associated with the vehicle.

First of all, let's go inside the car, then insert the key in question into the appropriate slot but not completely. Then press and hold the door unlock button for about 5 seconds and remove the key. At this point, verify that the operation was successful.


Posted on 28 December 2024 by ScegliAuto


Related tutorials

Audi Audi Various In this video, you will see how to remove and replace the battery of the electronic key remote on an Audi Q8. Take your remote in hand and start by r…
Audi Audi Various The procedure for replacing the battery in an Audi remote is very simple and is the same for all new generation models. The first step is to obtain a…
Audi Audi Various Today, we will show you instructions on how to remove and replace, in simple and quick steps, the battery of the key fob on the Audi TT MK1. First, t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos