Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Audi A1

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Tail light bulb

Following these brief and simple instructions, we will see how to disassemble and replace the bulbs of the rear headlight of the Audi A1. First, we open the rear hatch of the trunk and start removing the plastic cover on the door panel, corresponding to the taillight; then we unscrew the fixing screws and disconnect the electrical connector of the lights to remove the rear headlight, as shown in the video. At this point, we separate the bulb holder from the light fixture to access the bulbs, replacing them with new ones; finally, we reassemble the rear headlight!

Posted on 17 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Bulbs on Audi A1
Replacing Bulbs on Audi A1
Audi A1 (2010-2018 / 8X, MK 1) Are the rear light bulbs damaged? Do you want to replace the rear light? Remove the rear light and replace it. Open the boot and secure it; remove th…
How to Replace the Rear Headlamp Bulb on the Audi A1
How to Replace the Rear Headlamp Bulb on the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) This brief video tutorial explains how to independently replace the rear headlamp on the Audi A1. First, remove the three protective caps. Under the …
How to replace the rear headlight bulb of the Audi A1
How to replace the rear headlight bulb of the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) Replacing the rear headlight bulb of the Audi A1 independently is a simple and quick operation to perform. To carry out the replacement, we need to p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos