Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on an Audi A5

Model: Audi A5 8T8, 8T, 8T3, 8F - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

Let's see how to remove and replace the front headlamp on an Audi A5: open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Unscrew the retaining bolts of the front headlamp with a socket wrench, remove them from their seat, and extract the headlamp from the bumper.

Once the headlamp is removed, find the inspection cap (located at the back of the headlamp) and remove it. You will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulb using a screwdriver.

Fit the new bulb (always the correct type and size) and insert the bulb holder back into the headlamp housing. Finally, reassemble the headlamp with the retaining bolts and the inspection cap.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Glass on an Audi A5?
How to Replace the Front Headlamp Glass on an Audi A5?
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) To replace the front headlamp glass on an Audi A5, first loosen the screws that secure the headlight unit to its housing, allowing it to be removed w…
How to Replace the Front Headlamp Bulb on the Audi A5
How to Replace the Front Headlamp Bulb on the Audi A5
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) Today, we will provide the information needed to remove and replace the front headlamp bulb on the Audi A5. First, open the bonnet of the vehicle and…
How to Remove the Rear Light of an Audi A5
How to Remove the Rear Light of an Audi A5
Audi A5 (2007-2016 / 8T8, 8T, 8T3, 8F) Before you can start, open the boot of your Audi A5. First, unclip and move the inner side cover of the boot located near the rear light. Next, unscr…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos