Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Audi A7 key remote control

Model: Audi A7 MK 2 - Years 2018-2025
Part: Key

Today we will see the process of disassembling and replacing the battery of the key remote for the Audi A7, in simple steps. First, take the remote in hand and start by removing the physical key from inside it, using the appropriate button; then remove the battery tray, taking out the battery as shown in the video. At this point, install the new battery, of the correct type and with the same code (in this case a CR 2032 3V); insert it in the correct direction and then put the tray back in and finally the key on the remote!

Posted on 11 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery in an Audi A7
How to Replace the Key Fob Battery in an Audi A7
Audi A7 (2010-2017 / MK 1) To replace the battery in the key fob of an Audi A7, take the key and locate the release button on the back. Press the button and extract the mechani…
How to change the battery of the Audi A7 key remote control
How to change the battery of the Audi A7 key remote control
Audi A7 (2010-2017 / MK 1) In this short guide we will see how to disassemble and replace the battery of the key remote of the Audi A7, in the S7 version. First of all, we take…
Replacing Audi A7 Key Battery
Replacing Audi A7 Key Battery
Audi A7 (2010-2017 / MK 1) Let's replace the battery in the key of an Audi A7. Remove the plastic covers from the remote key. Take your ignition remote and pull out the spare m…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos