Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the outer cover of the mirror of an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side mirror

See other generations:
Video tutorial

Removing the cover of the external rearview mirror of an Audi A3 vehicle is a simple and quick operation that can be easily done independently, also thanks to our short video tutorial. To perform this operation, we first need to remove the mirror, using a plastic lever.

After removing the mirror, we proceed to remove the cover by unscrewing the internal clips, and once the cover is removed, you can proceed with the internal maintenance of the mirror. The assembly of the mirror follows the same procedure but done in reverse.

During the removal of the cover, do not apply too much force as you could break it.


Posted on 2 April 2025 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror of an Audi A3
Replacing the External Wing Mirror of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the external wing mirror (passenger side) of an Audi A3? Follow these steps. Using a plastic or rubber lever, pry between the peri…
How to Remove the Door Handle on an Audi A3
How to Remove the Door Handle on an Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Removing the left door handle on an Audi A3 model 8L is necessary when you want to paint the external door of the vehicle. To remove the handle, firs…
How to Replace the Indicator Bulb in the Audi A3 Wing Mirror
How to Replace the Indicator Bulb in the Audi A3 Wing Mirror
Audi A3 (2012-2019 / 8V, MK 3) This procedure shows you how to dismantle and replace the indicator bulb in the external wing mirror of the Audi A3. First, move to the side of the v…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos