Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Audi TT

Model: Audi Tt 8J, MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Removing the door panel of an Audi TT car is a simple and quick operation to be carried out independently. To perform this operation, we need to open the door and proceed to remove the central cover of the panel.

Since there is a screw under the cover, we use a 30 mm Torx screwdriver to remove it. We unscrew the side and bottom screws and then remove the panel. Disconnect the connector and remove the panel completely.

The assembly following the replacement of the speakers or the starter motor follows the reverse procedure.


Posted on 18 May 2025 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel on an Audi TT
How to Remove the Front Door Panel on an Audi TT
Audi Tt (2006-2014 / 8J, MK 2) Do you want to change the door panel cover? Let's go through the removal of the panel on an Audi TT. Open the door and locate the plastic pieces to r…
How to Remove the Door Panel of the Audi TT?
How to Remove the Door Panel of the Audi TT?
Audi Tt (2006-2014 / 8J, MK 2) To remove the door panel of the Audi TT, use a tool to pry off the cover located to the left of the inner handrail and directly above the window swit…
How to remove the door panel of an Audi TT?
How to remove the door panel of an Audi TT?
Audi Tt (2014-2023 / MK 3, 8S) To remove the door panel of an Audi TT, start by fully lowering the window to facilitate access. Identify and remove all visible mounting screws, usu…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos