Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the time on the Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Onboard computer

In this article we will show you how to adjust the clock of the on-board computer of the Audi Q3. The procedure does not require tools and takes little time to be carried out. To adjust the time, you must start the ignition without starting the engine, then press and hold the SET button to the left of the dashboard for a few seconds, at this point the time will start flashing, release the SET button and use the 0.0 button to the right of the dashboard to adjust the time, once adjusted use the SET button to confirm, now if necessary adjust the minutes and then the date confirming with the SET button. Once the date is set and confirmed, the procedure will be complete.

Posted on 7 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on the Audi Q3
How to Manually Set the Time on the Audi Q3
Audi Q3 (2018-2025 / F3) In this new mini guide dedicated to all of you Audi Q3 owners (model years 2018-2023), discover the steps to manually set the system time. First, get…
How to Set Time and Date in an Audi Q3
How to Set Time and Date in an Audi Q3
Audi Q3 (2018-2025 / F3) To set the time and date in an Audi Q3, turn on the instrument cluster or the multimedia system without necessarily starting the engine. On the centr…
How to reset the daily mileage (trip) of the Audi Q3
How to reset the daily mileage (trip) of the Audi Q3
Audi Q3 (2011-2018 / 8U) Below we will see the instructions that will allow us to reset the daily mileage (trip) of the Audi Q3. First of all, we get on board the car and sta…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos