Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Cabin air filter

Today we will explain how to replace the cabin air filter on your own, on an Audi A3 mk2 model vehicle. The filter is located inside the cabin, under the dashboard on the passenger side. Unscrew by hand the two plastic screws that hold the dashboard cover and remove it. Grab the filter flange and slide it to the right to remove it and extract the filter. Before inserting the new cabin filter, it is important to clean the compartment from leaves and impurities that may have remained inside. Insert the filter paying attention to the mounting direction, first insert the cut part from the door side and then push the filter into its compartment. Insert the flange by sliding it to the left and put back the cover. Finish by screwing the plastic screws of the cover.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Audi A3
How to replace the cabin air filter of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) In the following mini guide, we will help you complete the replacement of the cabin air filter in your Audi A3. First of all, make sure you have purc…
Removing the Cabin Air Filter on Audi A3
Removing the Cabin Air Filter on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Removing the cabin air filter? Here’s how to remove the filter from under the glove compartment of the A3. Remove the cloth located at the bottom of …
How to Replace the Cabin Filter in an Audi A3
How to Replace the Cabin Filter in an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Replacing the cabin air filter in your Audi A3 (2012-2019) is very simple, and with this mini guide, you will be able to carry out the entire operati…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos