Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the Audi Q5

Model: Audi Q5 MK 2, 80A - Years 2017-2025
Part:

Today we will see the information that will allow us to reset the tire pressure warning of the Audi Q5; before resetting the TPMS sensors, it is necessary that all four tires are at the operating pressure. So we get on board the car and start the instrument panel; through the controls of the central tunnel we will go to the car settings until we reach the tire pressure voice, as shown in the video. Now we follow the guided procedure to confirm and perform the reset of the tire pressure warning.

Posted on 12 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Audi Q5?
How to reset the tire pressure light in the Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) In this tutorial, we can see how to reset the tire pressure warning light in the Audi Q5, an extremely simple and quick operation, to be carried out …
How to reset the tire pressure light in the Audi Q5?
How to reset the tire pressure light in the Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) In this tutorial we can see how to reset the tire pressure warning light in the Audi Q5, an extremely simple and quick operation, to be performed onl…
How to reset the tire pressure light in the Audi Q5?
How to reset the tire pressure light in the Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) In this tutorial we can see how to reset the tire pressure light in the Audi Q5, an extremely simple and quick operation, to be done only once the co…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos