Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Audi A1

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Tail light bulb

Replacing the rear headlight bulb of the Audi A1 independently is a simple and quick operation to perform. To carry out the replacement, we need to purchase an H7 model bulb. We open the trunk of the car and remove the side part of the trunk to access the headlight compartment. We unscrew the headlight fixing nut and disconnect the connector to remove the headlight from its seat. We remove the light cover and replace the bulbs. We mount the light cover and insert the headlight into its seat; we screw the fixing nut and reconnect the connector. We close the side cover and test the operation of the bulb.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Audi A1
How to replace the headlight bulb of the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) If you want to replace the bulb of one of the two front headlights of your first series Audi A1 by yourself, just read the following guide and follow…
Replacing the Rear Light Bulbs on an Audi A1
Replacing the Rear Light Bulbs on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) Today, you will discover the main steps to remove and replace the rear light bulbs on an Audi A1. First, open the rear hatch of the boot and start by…
How to replace the front headlight bulb of the Audi A1
How to replace the front headlight bulb of the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) In this new guide we will discover the steps you need to take if you want to independently replace the headlight bulb of your Audi A1 first series. F…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos