Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part:

When the instrument panel indicates a malfunction in the tire pressure of a vehicle, it is important to adjust the pressure using the parameters provided by the manufacturer. Today we will explain how to perform this operation on an Audi Q5. To adjust the tire pressure, we need to use an air compressor and an electronic pressure gauge. After adjusting the pressure, we get into the vehicle and press the menu button located on the bottom of the dashboard, near the gear shift. From the settings menu, select the "TPMS RESET" option and set the new parameters.

Posted on 3 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the 2023 Audi Q5
How to reset the TPMS light on the 2023 Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) The following video will show you how to independently reset the TPMS warning light, related to tire pressure, on a 2023 Audi Q5. Before proceeding w…
How to reset the Audi Q5 service indicator
How to reset the Audi Q5 service indicator
Audi Q5 (2017-2025 / MK 2, 80A) If you don't know how to manually reset the service light of your Audi Q5, don't worry because in this new guide you will find all the instructions y…
How to Reset the Service Light on a 2021 Audi Q5
How to Reset the Service Light on a 2021 Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) Today, we will show you how to reset the service light on a 2021 Audi Q5 using two different procedures. The first procedure is to turn on the igniti…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos