Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the automatic opening and closing of the rear tailgate of the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Trunk lock

Today we will see the necessary information on how to activate the function of automatic opening and closing of the rear trunk hatch of the Audi A4. In order to activate this function, it is necessary to perform the coding through a specific tool (turning on the instrument panel to allow dialogue with the control unit), choosing the buttons on which to perform this type of operation; to make sure that this system works, it is necessary to have an electric rear hatch. In this case, the button on the door and the one on the instrument panel were used.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Installation of the springs for the automatic opening of the rear tailgate of the Audi A4 8K
Installation of the springs for the automatic opening of the rear tailgate of the Audi A4 8K
Audi A4 (2007-2016 / B8) To install springs that allow for the automatic opening of the rear tailgate of the Audi A4, we open the trunk hood, place a rod to prevent closure, …
How to close the external rearview mirror of the Audi A4
How to close the external rearview mirror of the Audi A4
Audi A4 (2007-2016 / B8) The instructions in this guide will show us how to close and open the external rearview mirrors of the Audi A4. First, we get into the car and start …
How to activate and deactivate the automatic door locking of the Audi A4
How to activate and deactivate the automatic door locking of the Audi A4
Audi A4 (2007-2016 / B8) These short and simple steps will show us how to activate and deactivate the automatic door locking of the Audi A4. First, we get into the car and st…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos