Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the adaptation of the automatic gearbox of the Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide, we will see the main instructions that will allow us to carry out the adaptation of the multitronic automatic gearbox of the Audi A4. In order to carry out the adaptation of the gearbox, it will be necessary to use a specific diagnostic software, to be connected to the OBD socket of the vehicle; in this case, the VCDS is used, as shown in the video.

We turn on the vehicle's instrument panel to allow dialogue with the control unit, following the guided procedure to reset the transmission ECU; finally, we verify the correct operation of the automatic gearbox.


Posted on 9 October 2025 by ScegliAuto


Related tutorials

Automatic Transmission Fluid Change for Audi A4
Automatic Transmission Fluid Change for Audi A4
Audi A4 (2014-2024 / B9) In this video tutorial, follow the steps to change the automatic transmission fluid in your Audi A4, as outlined below. First, lift the vehicle and s…
How to Remove the Automatic Transmission from an Audi A4?
How to Remove the Automatic Transmission from an Audi A4?
Audi A4 (2007-2016 / B8) To remove the automatic transmission from an Audi A4, you must first remove the front suspension, the half shafts, and the catalytic converter. Other…
How do you reset the automatic transmission of the Audi A4?
How do you reset the automatic transmission of the Audi A4?
Audi A4 (2014-2024 / B9) It will be possible to perform the reset procedure for the automatic transmission of the Audi A4 by turning on the instrument panel with the ignition…

    Frequently Asked Questions

    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos