Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front and rear seats of the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Seat

In this guide, we will see the instructions that will allow us to disassemble and replace the front and rear seats of the Audi A4. First, we open the doors of the vehicle and start by disassembling the front seats, unscrewing all the fixing screws we find on the seat rails and disconnecting the electrical connectors underneath. At this point, we remove the rear seats, starting with the disassembly of the bench seat; then we will also remove the backrests, proceeding with the cleaning or repair of the seats. Finally, we reassemble all the seats of the vehicle in order.

Posted on 20 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats of the Audi A4
How to remove the rear seats of the Audi A4
Audi A4 (2000-2004 / B6) Today's instructions will show us how to disassemble and, if necessary, replace or repair the rear seats of the Audi A4. First, we open the rear door…
How to remove Audi A4 rear seat
How to remove Audi A4 rear seat
Audi A4 (2004-2008 / B7) Whether you need to install a new carpet, new seat covers, install completely new seats or carry out a thorough cleaning, the seats must be removed i…
How to remove the rear seats of the Audi A4.
How to remove the rear seats of the Audi A4.
Audi A4 (2004-2008 / B7) Below we will see the steps to disassemble the rear seats of the Audi A4, following the instructions below. First of all, we open both rear doors and…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos