Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the hood release cable of the Audi A6.

Model: Audi A6 C4, MK 1 - Years 1994-1997
Part: Checks and maintenance

Today we will explain how to replace the hood release cable on a 1990 Audi A6. To open the hood in case it doesn't open from inside the vehicle, we need to insert a hook into the front grille between the rubber seal and the cable to unlock the internal hood lever and open it. Let's proceed with the cable replacement: disconnect the cable from the first clip by loosening the coolant reservoir, remove the second seal, and slowly pull out the cable. Slide the new cable in, securing the clips. As we insert it, we pass the cable through the first cabin and then along the steering column, connecting it to the internal release handle. Reposition the coolant reservoir and secure the cable with the original clips; attach the clamp and test the cable's functionality by opening the hood.

Posted on 18 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on Audi A6
How to Replace the Air Filter on Audi A6
Audi A6 (2011-2018 / C7, MK 4) Let's see how to replace the engine air filter on an Audi A6. Open the car door, pull up the hood release lever located at the bottom left of the das…
How to Replace Engine Air Filter on Audi A6
How to Replace Engine Air Filter on Audi A6
Audi A6 (2004-2012 / MK 3, C6) Let’s see how to remove the engine air filter on an Audi A6. Open the car door, pull up the engine hood release lever located at the bottom left of t…
How to Program the Remote for Door Unlocking on Audi A6 C5
How to Program the Remote for Door Unlocking on Audi A6 C5
Audi A6 (1997-2004 / MK 2, C5) In this video tutorial, you will learn how to program the remote for unlocking and locking the doors on the Audi A6 C5, as well as the Audi A4 B6. Fi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos