Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A6 pollen filter replacement

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Cabin air filter

How to replace the pollen filter on an Audi A6? Let's see how to do it: with a plastic lever we detach the rivets placed on the lining placed in the lower part of the dashboard (right side under the glove box). Let's get a screwdriver or a cordless drill and remove the fastening screws of the plastic coating. We extract the worn passenger compartment filter, insert a new passenger compartment filter making it adhere well around the walls of the box and refit the filter box cap. We tighten the screws of the lining; we check the correct assembly of the previously assembled pieces.

Posted on 1 November 2019 by ScegliAuto

Video tutorial

Related tutorials

How to replace a pollen filter on Audi A6
How to replace a pollen filter on Audi A6
Audi A6 (1997-2004 / C5, MK 2) How to replace the pollen filter on an Audi A6? Let's see in this video how to disassemble the filter placed in the dedicated housing. Unscrew the sc…
Replacing the pollen filter Audi A6 avant.
Replacing the pollen filter Audi A6 avant.
Audi A6 (2004-2012 / C6, MK 3) To replace the pollen cabin air filter in the Audi A6, we start by putting the car on the bridge or we arrange it on a plane, so that we can work on …
How to remove the pollen filter in the passenger compartment of an Audi A6
How to remove the pollen filter in the passenger compartment of an Audi A6
Audi A6 (2004-2012 / C6, MK 3) How to remove the pollen filter in the passenger compartment of an Audi A6? The cabin filter is found at the bottom right of the glove box. With a pl…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos