|
Do it yourself
| |||
| ||||
How do you reset the tire pressure warning light on the Audi A3?
Model: Audi A3
MK 3, 8V
- Years 2012-2019
It will be possible to completely reset the tire pressure warning light displayed on the Audi A3 instrument panel by inflating the tires until they reach the correct pressure value: this value will be indicated on the sticker attached to the driver's door pillar. Once the inflation is complete, you will need to navigate to the menu displayed on the screen in the center of the dashboard: you can select the "Servicing & checks" option, then "Store tyre pressures." This way, the sensors will be able to read the new pressure values, which, if correct, will allow the warning light to turn off.
Posted on 26 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Audi A3
(2020-2026 /
8Y, MK 4)
Resetting the tire indicator in the Audi A3, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must h…
Audi A3
(2003-2013 /
8P, MK 2)
The following steps will explain the process of resetting the tire pressure monitoring system (TPMS) light on the Audi A3; before performing the rese…
Audi A3
(2012-2019 /
MK 3, 8V)
The reset of the tire pressure warning light shown on the instrument panel of the Audi A3 is done by inflating the tires to the correct pressure valu…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
