Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Door trim panel

Today we will explain how to remove the door panel of the Audi A6 model C7. To perform this operation, we need to use a flathead screwdriver, a Torx screwdriver, and a trim removal tool. Using the trim removal tool, we remove the top part of the panel to access the screws securing the door handle. We unscrew the screws and remove the speaker cover. Next, we take off the central handle and the window switch panel. Finally, we unscrew the lower and side screws to remove the panel and disconnect the central connector.

Updated on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Door Panel Replacement on Audi A6
Door Panel Replacement on Audi A6
Audi A6 (1997-2004 / MK 2, C5) Replacing the door panel on an Audi A6? Let's look at removing the right front panel. Unscrew the screws located in the handle holes. Remove the swit…
How to Remove the Left Front Door Panel of an Audi A6
How to Remove the Left Front Door Panel of an Audi A6
Audi A6 (2011-2018 / C7, MK 4) Before you can start, open the left front door of your Audi A6. Begin by prying and removing the door panel inserts using a thin but sturdy tool. Nex…
How to remove the door panel of the Audi A6
How to remove the door panel of the Audi A6
Audi A6 (2004-2012 / MK 3, C6) To remove the door panel of the Audi A6 model c6, we need to open the rear door and unscrew the lower screws of the panel and the central screw. Afte…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos