Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Shell of the Audi Q7

Model: Audi Q7 MK 1, 4L - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

Today, let's go over the instructions that will allow us to replace the shell of the remote key for the Audi Q7. First, take the remote in hand and start by removing the plastic cover located on the back; then remove the battery located inside by unscrewing the two small screws to open the remote into two parts, as shown in the video.

At this point, remove the circuit board, also taking out the physical key and transferring all components in order to the new key shell; all that's left is to check its proper functioning!


Posted on 10 February 2026 by ScegliAuto


Related tutorials

How to Replace the Outside Rearview Mirror on an Audi Q7?
How to Replace the Outside Rearview Mirror on an Audi Q7?
Audi Q7 (2006-2015 / MK 1, 4L) To replace the outside rearview mirror on an Audi Q7, pry at the bottom of the glass to release the retaining clips inside. Once the glass is removed…
How to replace the battery of the Audi Q7 and SQ7 remote control
How to replace the battery of the Audi Q7 and SQ7 remote control
Audi Q7 (2006-2015 / MK 1, 4L) When the remote control of the Audi Q7 stops working, it means that the remote control battery needs to be replaced. To perform this operation, we ne…
How to Replace the Key Battery on an Audi Q7
How to Replace the Key Battery on an Audi Q7
Audi Q7 (2006-2015 / MK 1, 4L) Replacing the battery inside the key of your first-generation Audi Q7 is very simple and will only take a few seconds. First, purchase a new button b…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos