Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Audi Q5 2.0 TDI

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Starter motor

See other generations:
Video tutorial

Below are the instructions for removing and replacing the starter motor on the Audi Q5 2.0 TDI. First, open the trunk and disconnect the battery. Next, raise the vehicle and remove the lower engine cover by taking off the front wheel to access the starter motor, as shown in the video.

At this point, remove the mounting bolts for the starter motor, disconnect the wiring to take it out, and replace it with the new original one. Then, reassemble all components.


Posted on 15 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on an Audi Q5 2.0 TDI
How to Replace the Fuel Filter on an Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) This guide provides instructions to remove and replace the fuel filter on an Audi Q5 2.0 TDI. First, locate the fuel filter under the vehicle, not us…
Replacing the Timing Belt on the Audi Q5 2.0 TDI
Replacing the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) This guide outlines the main steps to remove and replace the timing belt on the Audi Q5 2.0 TDI. First, open the hood and start by removing the front…
How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) Today's guide will show you how to remove and replace the timing belt on the Audi Q5 2.0 TDI. The manufacturer states that for this type of engine, t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos