Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Pre Sense System in the Audi Q3?

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to disable the Pre Sense system in the Audi Q3, a very simple and quick operation to perform if you find it too intrusive. First, enter the cabin, then insert the key and start the vehicle.

Next, press the button depicting a car located on the left side of the touchscreen display, go to "Driver assistance," find the "Audi pre sense" option, and remove the checkmark. The system's deactivation is not permanent and must be performed each time you start the vehicle.


Posted on 30 April 2026 by ScegliAuto


Related tutorials

How to deactivate the traction control of the Audi Q3
How to deactivate the traction control of the Audi Q3
Audi Q3 (2011-2018 / 8U) For illustrative purposes, we will see how to deactivate the traction control of the Audi Q3; it is recommended to always keep this system active to …
How to disable the Start&Stop of the Audi Q3
How to disable the Start&Stop of the Audi Q3
Audi Q3 (2011-2018 / 8U) Today we will explain how to deactivate the start&stop system of the Audi Q3 model 8U. We connect the OBD socket to the diagnostic computer via Bluet…
How to Disable the Passenger Airbag in the Audi Q3?
How to Disable the Passenger Airbag in the Audi Q3?
Audi Q3 (2011-2018 / 8U) In this tutorial, you will learn how to disable the passenger airbag in the Audi Q3, a very simple and quick operation that must be done after instal…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos