Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Remote Battery in an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Key

This brief guide provides instructions on how to disassemble and replace the battery of the remote key for an Audi A3. First, take the remote in hand and start to lever on the side slot of the back cover of the remote to remove it; then take out the battery found inside, as shown in the video. Next, install the new battery of the correct type and with the same designation; insert it in the correct orientation and refit the plastic cover, finally checking the operation of the buttons.

Posted on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) How do you change the battery of an Audi A3 remote key? Let's see how to change the key battery. Take your remote key and use a screwdriver to pry op…
Audi A3 (2012-2019 / 8V, MK 3) To replace the battery of a 2017 Audi S3 remote control, we need to use a CR2032 model battery and a flathead screwdriver. Lift the key from the remo…
Audi A3 (1996-2003 / MK 1, 8L) Replacing the key of an Audi A3? Here’s how to disassemble the battery inside the remote key. Take your ignition key and press the button to release …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos