Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter in an Audi A3 Sportback

Model: Audi A3 Sportback MK 3 - Years 2012-2019
Part: Cabin air filter

To replace the cabin air filter in an Audi A3 Sportback, open the passenger door and access the area under the glove compartment. Locate the cover of the pollen filter housing, usually secured with tabs or small fasteners. Remove the cover and slide out the old filter. Note the installation direction indicated by the arrows printed on the filter and clean the inside of the housing to remove accumulated dust and debris. Insert the new filter, ensuring the airflow direction indicated by the manufacturer is respected. Reposition the cover and ensure all fasteners are securely attached. Finally, check the proper operation of the ventilation and air conditioning system.

Posted on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Engine Air Filter on an Audi A3 Sportback
How to Remove and Replace the Engine Air Filter on an Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) How to remove and change the engine air filter on an Audi A3 Sportback? Follow these steps: use a screwdriver to remove the clamps from the air intak…
How and When to Change the Timing Belt on the Audi A3 Sportback 1.6 TDI
How and When to Change the Timing Belt on the Audi A3 Sportback 1.6 TDI
Audi A3 Sportback (2012-2019 / MK 3) This guide explains how and when to change the timing belt on the Audi A3 Sportback; generally, the belt should be replaced within a range of 75,000 …
How to Remove the Rear Lights of an Audi A3 Sportback
How to Remove the Rear Lights of an Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) Here’s how to remove the rear lights of an Audi A3 Sportback: open the tailgate and move the trim aside, remove the cover, then use a flat screwdrive…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos