Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from an Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Fuel pump

See other generations:
Video tutorial

How to remove the fuel pump from an Audi A4? First, disconnect the battery cables; remove the carpet panel in the trunk. Use a socket wrench to remove the screws securing the metal cap (if present) and take it out of its seat (disconnect the power connector).

Remove the large securing bolt of the fuel pump, disconnect the power connectors and the fuel return lines. Extract the fuel pump assembly from its seat along with the attached parts.

Install the new fuel pump in the trunk with all the attached parts.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from the Audi A4 Fuel Tank
How to Remove the Fuel Pump from the Audi A4 Fuel Tank
Audi A4 (2000-2004 / B6) Is the fuel pump on your Audi A4 damaged? Here’s how to remove it. Start by removing the rear seats to access the fuel pump. Use a socket wrench to u…
Remove the Fuel Pump/Floating Unit on Audi A4 B8
Remove the Fuel Pump/Floating Unit on Audi A4 B8
Audi A4 (2007-2016 / B8) In this video, see how to remove the fuel pump or floating unit on an Audi A4 B8 in simple steps. First, remove the rear seat by lifting it up. Then,…
Removing Fuel Pump from Audi A4 B8
Removing Fuel Pump from Audi A4 B8
Audi A4 (2007-2016 / B8) .. In this video tutorial, you will learn how to remove the fuel pump from an Audi A4 B8. First, access the rear of the car and remove the rear.. …

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fuel pump relay located in the Audi A4? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos