Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuses Located in the Audi A1?

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

In the Audi A1, all fuses are contained within the single fuse box present inside the vehicle. In this type of car, the box is located on the side of the dashboard next to the steering wheel, accessible only by opening the driver's door.

Therefore, in right-hand drive cars, it will be on the right side, and in left-hand drive cars, it will be on the left side. Inside the box, you can identify the fuses for the steering wheel controls, windscreen wipers, rear lights, etc. Each fuse is labelled with its corresponding amperage and code.


Posted on 18 August 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Audi A1?
Audi A1 (2018-2025 / MK 2, GB) Each fuse in the Audi A1 is located inside one of the designated fuse boxes installed in the vehicle: here you will find two boxes for holding the fu…
Where Are the Fuses on the Audi A1?
Where Are the Fuses on the Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) The fuses on the Audi A1 are contained within the designated fuse boxes located in the vehicle: in this model, you will find two boxes for the fuses.…
Where are the Fuses Located on an Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) The fuse boxes in the Audi A1 contain the fuses that control the operation of devices installed within the vehicle. In this type of vehicle, the box …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos