Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove Audi A4 rear seat

Model: Audi A4 B7 - Years 2004-2008
Part: Seat

Whether you need to install a new carpet, new seat covers, install completely new seats or carry out a thorough cleaning, the seats must be removed in order to gain access to the hidden parts of the seat. So you are in the right place, here are the tips to remove the rear seats of your Audi. Park your car so that it is out of the way for anyone, engage the handbrake. Then we start by lifting the front of the seat and sliding the piece forward. We check that there are no cables connected, in case we disconnect the connectors. Now we can take out the seat.

Posted on 13 February 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat of an Audi A4
How to remove the front seat of an Audi A4
Audi A4 (2000-2004 / B6) Let's see how to remove the front seat of an Audi A4. We disconnect the power supply terminals (located in the luggage compartment), move the seat ba…
How to remove the front seat of the Audi A4 B5
How to remove the front seat of the Audi A4 B5
Audi A4 (1994-2000 / B5) The guide shows how to remove the front seats of the Audi A4 B5. After pulling the seat to be removed forwards, from the passenger compartment on the…
We disassemble the front seat of an Audi A4
We disassemble the front seat of an Audi A4
Audi A4 (2004-2008 / B7) We disassemble the front seat of an Audi A4. This video explains how to proceed. First of all we move the seat forward (with the electric buttons or …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos