Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heater Core from an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Heater core

Let's see how to remove the heater core from an Audi A4. Remove the plastic covering from the center tunnel using appropriate plastic or metal levers. Unscrew the fastening screws with a screwdriver and remove the black plastic cover that hides the heater core housing. Once all the steps are completed, pull the heater core out of its housing with your hands. Finally, replace it with the new metal heater core. Prepare to reassemble all the previously removed parts, working backward through the assembly steps.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Heater Core in an Audi A4
Replacing the Heater Core in an Audi A4
Audi A4 (1994-2000 / B5) This guide outlines the main steps to remove and replace the heater core in the cabin of an Audi A4. First, open the hood and disconnect the heater c…
How to Remove the Heater Core from the Audi A4 B7
How to Remove the Heater Core from the Audi A4 B7
Audi A4 (2004-2008 / B7) In today's tutorial video, you will learn how to remove and replace the heater core in the Audi A4 B7 in simple steps. First, get inside the vehicle …
How to Replace the Heater Core in an Audi A4 B6
How to Replace the Heater Core in an Audi A4 B6
Audi A4 (2000-2004 / B6) Watch this video for the main instructions on how to remove and replace the heater core in the cabin of an Audi A4 B6. First, open the hood and start…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos