Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heater Core from the Audi A4 B7

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Heater core

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the heater core in the Audi A4 B7 in simple steps. First, get inside the vehicle and start by removing the plastic panel above the footwell by unscrewing the 8 mm screws; then open the hood and disconnect the hoses from the heater core located next to the battery, as shown in the video.

At this point, drain the coolant and unscrew the clamps on the hoses found at the base of the heater core; once disconnected, you can replace the entire heater core!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Heater Core from an Audi A4
How to Remove the Heater Core from an Audi A4
Audi A4 (2004-2008 / B7) Let's see how to remove the heater core from an Audi A4. Remove the plastic covering from the center tunnel using appropriate plastic or metal levers…
How to replace the heater core in an Audi A4?
How to replace the heater core in an Audi A4?
Audi A4 (1994-2000 / B5) To replace the heater core in an Audi A4, you need to remove the entire dashboard from both the passenger and driver sides. Once the screws securing …
How to Replace the Heater Core in an Audi A4
How to Replace the Heater Core in an Audi A4
Audi A4 (1994-2000 / B5) To replace the heater core in the cabin of an Audi A4, you must completely disassemble the dashboard. Start by removing the steering wheel and its ai…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos