|
Do it yourself
| |||
| ||||
How to Replace the Thermostat on an Audi A3 EA288 Engine
Model: Audi A3
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
On the Audi A3 with EA288 engine (1.6/2.0 TDI, from 2013), the thermostat is located on the right side of the engine block. With the engine cold, remove the engine cover and the air filter box (unscrew the screws and detach the duct). Disconnect the mass air flow sensor and the intake hoses. Locate the thermostat by following the main water hose. Remove the outlet hose and the intercooler duct (three screws and a clamp). Unscrew the thermostat cover screws and remove it, being careful of any fluid that may spill. Clean the seating, replace the O-ring (lubricated with silicone), and insert the new thermostat into the guides. It can be found on eBay with code 178551391034 for £34.76, with free delivery. Refit the cover and reconnect hoses and connectors. These engines tend to form air pockets, so it is essential to bleed the system using a diagnostic tool (guided procedure: about 15 minutes with brake and accelerator pressed, revs rising to 2,500 and then 3,000 rpm). Without bleeding, the engine may overheat. Fill with the correct coolant (G12++/G13, not tap water).
Posted on 19 November 2026 by ScegliAuto
Related tutorials
Audi A3
(1996-2003 /
MK 1, 8L)
To replace the thermostat on an Audi A3, open the bonnet to access the components in the engine bay. First, you need to remove the air filter box to …
Audi A3
(2003-2013 /
8P, MK 2)
To replace the thermostat on an Audi A3, open the bonnet to access the components inside the engine bay. On the right side, you will find the alterna…
Audi A3
(2003-2013 /
8P, MK 2)
In this guide, we will see the main instructions on how to remove and replace the thermostat on the Audi A3 2.0 TDI. First, lift the vehicle and begi…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to turn on the fog lights in Volkswagen Polo cars?
If you don't know how to turn on the fog lights of a Volkswagen Polo and are looking for a video tutorial, this is the right opportunity to learn. This is a video with verbal commentary, aimed at Volkswagen cars in general, brief but very clear to understand, as it gets straight to the point and explains everything simply. After turning on the instrument cluster, first turn on the dipped headlights and then move the selector to the fog light symbol. To activate the rear fog lights, pull the same selector back. This is all you need to do, nothing more. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |