Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the ABS brake control unit on Audi A6

Model: Audi A6 C6, MK 3 - Years 2004-2012
Part: Control unit

Does the ABS control unit no longer work? Let's see how to take it apart. We open the engine compartment (front hood) and identify where to disassemble the piece. We disconnect the various power supply terminals from the battery, then unscrew the control unit with a suitable fixed or socket wrench (disconnect the power supply). Once the control unit has been extracted, let's compare it with the new piece. We assemble the new control unit with a special key and reconnect the power supply terminals disconnected previously. Finally we connect the terminals of the power supply of the engine battery. Let's check if the control unit works.

Posted on 17 April 2020 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the ABS Module and Programming
Replacing the ABS Module and Programming
Audi A6 (1997-2004 / C5, MK 2) The ABS module is a device that calculates and requests the application of braking force, so that the driver does not have to worry about how to inte…
Replacing a Faulty ABS Control Module
Audi A6 (1997-2004 / C5, MK 2) For this replacement operation, use a ratchet wrench with a 10 mm socket. Start by unbolting the brake fluid reservoir, which needs to be moved out o…
Audi A6 comfort control unit replacement
Audi A6 comfort control unit replacement
Audi A6 (2004-2012 / C6, MK 3) Do we want to replace the comfort control unit of an Audi A6? Let's see where to find the control unit and how to disassemble it. We open the car doo…

Other guides you may be interested in

How to Replace the Antenna on a Volkswagen Bora

Want to replace the damaged radio antenna on your car but don't know how to proceed? In this video, we will show you the very simple steps to take. After purchasing the new antenna (with the same size and thread as the original), unscrew the old one by hand until it is completely detached from its base. Take the new antenna and screw it (until fully tightened) into the plastic base on the roof of your car. Finally, check the correct functioning of the antenna by turning on the radio and receiving channels.

Watch the video!


by ScegliAuto

More videos