Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the instrument cluster on Audi TT

Model: Audi Tt MK 1, 8N - Years 1998-2006
Part: Instrument cluster

Do we have problems with the instrument cluster of our Audi TT? Let's see the disassembly of the piece. With a lever, remove the plastic covers under the steering wheel (without breaking the plastic clips) and detach them away from the dashboard. Unscrew the tightening screws located under the instrument panel, remove it and disconnect the power supply terminals. After removing the instrument panel from the dashboard, let's get ready to mount a new piece or reassemble the same (we can repair the instrument panel if necessary). Finally, let's proceed backwards in the assembly operations of the instrument panel. We mount the coating plastics.

Posted on 20 April 2020 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service warning light on the Audi TT first series
How to reset the service warning light on the Audi TT first series
Audi Tt (1998-2006 / MK 1, 8N) For this guide, the procedure for resetting the service warning light for the first series Audi TT will be described. The steps to follow are, in ord…
How do you replace the wiper motor on the Audi TT?
How do you replace the wiper motor on the Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) To be able to replace the wiper motor on the Audi TT, you must first loosen the bolts that secure the blades and remove them. Next, you will need to …
How do you replace the rear light on the Audi TT?
How do you replace the rear light on the Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) In order to replace the rear light of the Audi TT it is necessary to open the tailgate of the luggage compartment and go to unscrew the knob located …

Other guides you may be interested in

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos