Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel from an Audi TT?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Steering wheel

To remove the steering wheel from the Audi TT, turn the wheel 90 degrees to the left to access the screw at the back. Repeat the same operation by turning the wheel 90 degrees to the right. Once these two screws are loosened, you can remove the airbag by disconnecting its connector. Next, use a socket wrench to loosen the nut that secures the steering wheel to the steering shaft. Once the nut is loosened, you can pull off the steering wheel, which should be replaced with a new part.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel of the Audi TT
How to remove the steering wheel of the Audi TT
Audi Tt (2006-2014 / MK 2, 8J) Today we will discover the instructions that will allow us to disassemble and replace the steering wheel of the Audi TT, in simple and quick steps. F…
How to Replace the Window Switch on Audi TT
How to Replace the Window Switch on Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Remove the door panel of an Audi TT to access the window motor (driver side). Before starting the disassembly, disconnect the battery terminals locat…
How to Open the Gas Cap on an Audi TT
How to Open the Gas Cap on an Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Unlock the fuel door on the Audi TT if you cannot open it. First, open and lift the trunk using the appropriate key or button. Remove the plastic cov…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos