Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Airbag Switch on an Audi TT MK2

Model: Audi Tt 8J, MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Airbag

See other generations:
Video tutorial

In this video, we can see how to replace the airbag switch on an Audi TT MK2: to remove it, we need to take out the glove compartment by removing the three screws located at the top inside and the two at the bottom outside. Disconnect the wire from the switch we intend to replace, then remove the switch using a small screwdriver or plastic spatula; it will fall into the glove compartment, and now we can install the new one that we have obtained, for example, on eBay with the code 363361585633 for $96.38, with free shipping.

The YouTuber also shows us how the switch is made internally, but we only need to replace the part with the new one and then put the glove compartment back in place to finish the job.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Disable the Passenger Airbag in an Audi TT
How to Disable the Passenger Airbag in an Audi TT
Audi Tt (2014-2023 / MK 3, 8S) To disable the passenger airbag in an Audi TT, open the glove compartment located on the front passenger side. At the top of the compartment, there w…
How to Remove the Steering Wheel of the Audi TT
How to Remove the Steering Wheel of the Audi TT
Audi Tt (2006-2014 / 8J, MK 2) Today, let's go through the instructions to remove and replace the steering wheel of the Audi TT in simple and quick steps. First, get inside the veh…
How to Remove the Steering Wheel from an Audi TT?
How to Remove the Steering Wheel from an Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) To remove the steering wheel from the Audi TT, turn the wheel 90 degrees to the left to access the screw at the back. Repeat the same operation by tu…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos