Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Audi A3 Front Bumper Grille

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Trim cover

See other generations:
Video tutorial

Remove the central grille of the front bumper on an Audi A3 if damaged. Unscrew the screws above, to the side, and below the bumper.

Using a plastic lever, pry between the frame and the bumper until the clips inside release (release all locking clips). Once the clips are released, remove the grille from the bumper and fit a new one. Press the grille into the bumper until it locks in place (secure the mounting clips).

Check the correct fitting of the parts.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Removing the Climate Control Controls on an Audi A3
Removing the Climate Control Controls on an Audi A3
Audi A3 (2020-2026 / MK 4, 8Y) In this guide, discover the instructions to remove and replace the climate control controls on an Audi A3. First, get inside the vehicle and begin by…
Removing the Stereo on an Audi A3
Removing the Stereo on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) This short video shows you how to extract the stereo/radio on an Audi A3 and similar models. To remove the lower plate of the radio, first, obtain th…
Guide to Dismantling the Ignition Barrel of the Audi A3
Guide to Dismantling the Ignition Barrel of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today, this guide shows the steps on how to dismantle and replace the ignition barrel of the Audi A3. First, get inside the vehicle and start by remo…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos