Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Compartment

Model: Audi A4 B7 - Years 2004-2008
Part: Glove compartment

To remove the glove compartment, first remove the upper plastic trim. To avoid leaving marks, use a plastic tool to also remove the trim on the steering wheel side. Unscrew all the screws located under the trims using a drill with an extension. Unscrew the screws located under the dashboard by pulling up the glove compartment latch. Remove the corresponding plastic clips and unscrew the screws located on the sides behind and under the dashboard. Once all screws are removed, you can carefully extract the entire glove compartment assembly.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the glove box Audi A4 B6
Removing the glove box Audi A4 B6
Audi A4 (2000-2004 / B6) In this video we will see the instructions to be able to disassemble the glove box of an Audi A4 B6 and B7. First we get on board the car and go to o…
Audi A4 glovebox removal
Audi A4 glovebox removal
Audi A4 (2000-2004 / B6) In this video we are going to see how to remove the glove compartment of our Audi A4, sedan or Avant. First we go to lever with a screwdriver in the …
How to Remove the Fan Resistor on Audi A4
How to Remove the Fan Resistor on Audi A4
Audi A4 (2000-2004 / B6) How to remove the fan resistor on Audi A4? Let's see in this video how to perform the disassembly. Remove the plastic under the glove compartment usi…

Other guides you may be interested in

How to Replace the Window Regulator on the Mercedes W124

First, remove the door panel of the affected door and lower the window to about 0.4 in from the seal. Then, proceed to remove the speaker by unscrewing the bolts that secure it, and gently pull off any additional protective panel. Disconnect any plugs from the controls and remove the rivets that secure the window lift mechanism. This will allow you to unscrew the bolts that secure the window's cross mounting system. Remove the entire assembly and replace it by reversing the steps described.

Watch the video!


by ScegliAuto

More videos