Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Rear Light and Replace a Bulb in the Audi A4.

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Tail light

See other generations:
Video tutorial

Before installing the bulb in the rear light assembly of the Audi A4, first ensure you can work safely and stably to protect your well-being. This precaution should be taken whenever performing maintenance on a vehicle.

So, position your car on a lift or flat surface. At this point, open the trunk.

On the inner edge of the opening (where the trunk lid closes), near the rear light housing that holds the bulb you want to replace, remove a cover plug. Using the appropriate wrench and a simple trick (as shown in the images) to prevent the screw from falling into the cavity created by the inner lining, unscrew the screw that secures the light assembly in place.

Now, using your hands, carefully remove the light assembly from its housing without forcing it. Once this is done, simply disconnect the electrical supply, remove the bulb holder assembly, and proceed with the replacement. Reassemble everything by following the steps in reverse order!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Replace the Brake Light on Audi A4
Replace the Brake Light on Audi A4
Audi A4 (2000-2004 / B6) Replacing the rear brake light on an Audi A4? It's a fairly simple task, let's see. Open the trunk hood, unscrew the fastening screws located at the …
Replacing the Rear Light on Audi A4
Replacing the Rear Light on Audi A4
Audi A4 (2000-2004 / B6) Remove the rear light to replace it or to change the damaged bulbs inside. Lift the trunk. Get a socket wrench, remove the screw cover cap on the sid…
How to Replace the Reverse Light Bulb on an Audi A4
How to Replace the Reverse Light Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Before starting, open the trunk of your Audi A4. Begin by prying off and moving the inner cover near the reverse light. Next, disconnect the electric…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos