Do it yourself
Frequently asked questions about cars and motorcycles

Suspension Arm Replacement

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Control arm

See other generations:
Video tutorial

Driving on rough terrain or using road salt for snow melting often damages the bushings of the suspension arms, making them annoyingly noisy. Replacing the suspension arms is a relatively simple task: you just need to remove the mounting bolts that secure the arm at both ends of the suspension (shock absorber side and suspension support side), extract the ball joints from their respective seats, and then install the new arms in reverse order (it is recommended to replace both even if only one is damaged).

After installation, the ride will become much more comfortable and quiet.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Audi A4 (2004-2008 / B7) If the armrest is damaged, replace it with a new one. Enter the cabin and grab the armrest by the top where the fabric is located. Disconnect it and …
Audi A4 (2000-2004 / B6) Lift the vehicle on a lift, remove the front wheel, and place a jack under the suspension; then remove the fastening bolts of the link to the stabili…
Audi A4 (1994-2000 / B5) For this operation, you need a wrench and a puller. Remove the wheel and unscrew the nut on the wheel hub. Securely tie the entire suspension arm ass…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos