|
Do it yourself
| |||
| ||||
How to replace the thermostat on an Audi A4
Model: Audi A4
B8
- Years 2007-2016
Before we can start, we will have to go and open the front hood of our Audi A4. So let's start by removing the top engine cover, simply disengaging it. After that we will have to go and regularly empty the cooling system, so as to avoid leaks during disassembly. Once the system is emptied, we can go and unscrew the bolts that secure the thermostat cover located behind the alternator. Once we have removed the cover fixing bolts, we will be able to remove the cover itself, thus reaching the thermostat. To disassemble it, we will simply have to extract it, and we will have finished the disassembly. To mount the new thermostat and close everything, all we have to do is repeat these instructions in reverse, and we will have completed the replacement.
Posted on 19 December 2020 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2007-2016 /
B8)
Do you want to replace the thermostat valve on your Audi A4 and don't know where it is located or how to remove it? Let's see in the following video …
Audi A4
(2007-2016 /
B8)
To be able to replace the thermostat on the Audi A4 you have to go and open the hood, so that you can access the rear part of the engine block. In fa…
Audi A4
(1994-2000 /
B5)
To be able to replace the thermostat on the Audi A4 you have to go and lift the car and access its lower part, in order to disconnect the radiator ho…
Other guides you may be interested in
|
How to Remove the Spark Plugs on an Opel Astra
Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |