Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on an Audi A4?

Model: Audi A4 B5 - Years 1994-2000
Part: Thermostat

To replace the thermostat on an Audi A4, lift the vehicle and access the underside to disconnect the radiator hose and completely drain the coolant. Next, open the hood and remove the bolts securing the alternator on the side of the engine compartment. Once the alternator is removed, take out the thermostat from its housing and replace it with a new one. After the replacement, reinstall all previously removed components.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on an Audi A4
How to Replace the Thermostat on an Audi A4
Audi A4 (2004-2008 / B7) Before starting, open the hood of your Audi A4. Begin by unclipping and removing the upper engine cover, then disassemble and remove the air filter h…
How to Replace the Thermostat on an Audi A4
How to Replace the Thermostat on an Audi A4
Audi A4 (2007-2016 / B8) To replace the thermostat on an Audi A4, open the hood to access the rear of the engine block. The thermostat is located at the back of the engine bl…
How to Replace the Thermostat on an Audi A4
How to Replace the Thermostat on an Audi A4
Audi A4 (2007-2016 / B8) Before you begin, open the hood of your Audi A4. Start by removing the upper engine cover by simply disengaging it. Next, drain the cooling system to…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos