|
Do it yourself
| |||
| ||||
|
To unscrew the bolts that secure the wheel you must first remove, in the case of our video, the wheel cover that does not allow you to access them. In theory, this would require a special tool to be inserted into the hole to extract the lid itself. In reality, it is sufficient to use any tool that is fine enough to enter this hole, and to pry it out to remove the lid. Once this is done, you can loosen the bolts of the wheel or wheels concerned, lift the vehicle and unscrew them completely, in order to replace the aforementioned wheels. Good job!
Posted on 12 May 2021 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2014-2024 /
B9)
Resetting the tire pressure indicator in the Audi A4, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, …
Audi A4
(2014-2024 /
B9)
In this tutorial we can see how to reset the tire pressure light in the Audi A4, an extremely simple and quick operation, to be done only once the co…
Audi A4
(2014-2024 /
B9)
Resetting the tire indicator in the Audi A4, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, it will b…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
