Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install rear wiper motor on Audi A4 B7

Model: Audi A4 B7 - Years 2004-2008
Part: Power window motor

In today's video we will see how to install the rear wiper motor on an Audi A4 B7. First of all, let's place the new wiper motor on the boot lid, where the three inserts are located; once positioned we will fix the three nuts and the electric connector of the motor. At this point we are going to mount the rear hatch panel again, fixing it with the screws; we just have to mount the wiper arm, fixing it with the central nut, and then mount, if necessary, the new rear wiper!

Posted on 10 June 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor of the Audi A4 1.8T
How to replace the starter motor of the Audi A4 1.8T
Audi A4 (2000-2004 / B6) Below we will see the main instructions on how to disassemble and replace the starter motor of the Audi A4 1.8T. First, we raise the vehicle to acces…
Replacement of the rear windshield wiper motor of the Audi A4
Replacement of the rear windshield wiper motor of the Audi A4
Audi A4 (2004-2008 / B7) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear windshield wiper motor of the Audi A4. First…
Disassembly of the rear windshield wiper motor of the Audi A4.
Disassembly of the rear windshield wiper motor of the Audi A4.
Audi A4 (2007-2016 / B8) The steps illustrated in this guide will show us how to disassemble and replace the rear windshield wiper motor or rear wiper of the Audi A4. First, …

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Watch the video!


by ScegliAuto

More videos