Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear air vents on an Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Air vents

Before we can begin, we will have to go and sit in the driver's seat of our Audi A6. Let's start by inserting two thin but strong tools inside the gap between the air vents. After that, we'll have to go leverage. By doing so, we will have cleared the rear air vents. We then proceed by going to extract the vents from the central tunnel. At this point, we will have to disconnect the relative electrical connector. When we have completed this last step, we will be able to permanently remove the air vents of our Audi A6, and we will have completed the disassembly.

Posted on 20 June 2021 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear ventilation nozzles of the Audi A6
How to disassemble the rear ventilation nozzles of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) The following steps will show us how to disassemble and replace the rear ventilation nozzles of the Audi A6. First of all, we get on board the vehicl…
How to remove the air vents
How to remove the air vents
Audi A6 (2004-2012 / C6, MK 3) Let's see how to remove the air vents (central dashboard) of an Audi A6. We use multiple levers (screwdrivers) to remove the vents. We leverage the u…
How to disassemble the air vents of the Audi A6
How to disassemble the air vents of the Audi A6
Audi A6 (1997-2004 / C5, MK 2) In this guide we will see how to disassemble and replace the air vents of the Audi A6, also in the Allroad version. First of all, we get on board the…

Other guides you may be interested in

How to Replace the Engine Air Filter on a Volkswagen Polo

Remove the engine air filter from a Volkswagen Polo: open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it with the prop rod. Remove the engine soundproofing panel (if necessary), then open the air box (unscrew the securing screws), remove the cover of the filter box and take out the engine air filter. Insert a new filter into the dedicated housing (ensuring it fits snugly around the edges). Finally, refit the air box cover and tighten the screws. Close the front bonnet after maintenance.

Watch the video!


by ScegliAuto

More videos