Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Brake pads

To replace the front brake pads on an Audi A4, first remove the wheel. Next, use a 13 mm wrench to loosen the bolts that secure the caliper to the brake rotor: at this point, the caliper will be detached from the rotor. Once the caliper is detached, open it by removing the screw located at its center. By opening the caliper, you can remove the old pads from their housing and insert the new replacement parts. Once the replacement is complete, close and secure the caliper and reinstall the wheel.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How and when to replace the front brake discs of the Audi A4
How and when to replace the front brake discs of the Audi A4
Audi A4 (2014-2024 / B9) The instructions provided in this guide will show us how to disassemble and replace the front brake discs of the Audi A4; brake discs should be repla…
How to Replace the Rear Brake Pads with Electric Parking Brake on Audi A4
How to Replace the Rear Brake Pads with Electric Parking Brake on Audi A4
Audi A4 (2007-2016 / B8) This guide provides instructions for replacing the rear brake pads with an electric parking brake on the Audi A4 without using a diagnostic tool. Fir…
Replacing the Rear Brake Pads on the Audi A4
Replacing the Rear Brake Pads on the Audi A4
Audi A4 (2007-2016 / B8) This guide shows you how to remove and replace the rear brake pads on the Audi A4 in simple and quick steps. First, lift the vehicle and remove the r…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos